How to Repair and Seal Your Driveway

A cracked or damaged driveway doesn’t look good and if not repaired in a timely manner, then it would cause many problematic issues soon. Homeowners often hire a professional asphalt service in McLean, VA to get their cracked driveway fixed. However, this is one of those projects that can also be handled without hiring the professional help. In this article, I am going to show you how you can repair your damaged asphalt driveway to get it the right shape and condition.

Asphalt Service Mclean VA

Important: Before you begin such projects, it is important that you should make sure that there are no chances of rain within the next 24-48 hours. The project would go on perfectly under the clear skies. So, keeping an eye on the weather forecast is crucial here.

Let’s Get the Needed Tools and Materials

Before you begin the asphalt repair process, you must need to have the needed tools and the required materials.

Here are the needed tools that you should get to start the job:

  • Paintbrush
  • Squeegee
  • Broom or the Leaf Blower

Here are the materials that you need to arrange:

  • Driveway Seal
  • Crack Filler
  • Bleach

Once you have got all the things and materials ready, you can start the repair process. Now, let’s take a look at the repair process to show you how you can do it on your own.

Asphalt Repair Mclean VA

Let’s Start the Repair Process

A pro doing asphalt repair in McLean, VA will do the job in a proper manner and in the right order. Here are those professional steps that you can also perform in the described way to repair your cracked asphalt:

Step 1: Clean Your Driveway

There will be dust, acorns, and leaves, etc on your driveway. Clean them using a broom or leaf blower. For oil stains, you can use a primer or degreaser in order to clean it. If there are weeds visible between the cracks, then pluck them. If there is moss, then put bleach in the spray bottle and target the moss to kill it followed by lifting it off your surface by using a scraper. Wait until the driveway gets dry.

Step 2: Patching Cracks & Holes

Don’t do the crack repair in a rush before the application of the sealant final coat, if you want to ensure the best results. If the crack is not more than ½”, then you can use a crack filler bottle. The filler will probably take 4 to 8 hours to dry. For the cracks that are more than ½”, you need to do the repair by using the back of the shovel or a tamper and driveway patch for the repairs. In case if the driveway patch is used, then you are recommended to seal it after 4 to 6 weeks.

Cracks repair Mclean VA

Step 3: Clean the Driveway and Mix Sealant

Now, clean the driveway surface again by using a leaf or broom blower, but make sure that the weather would be sunny for the next 24 to 48 hours. Mix up the sealant buckets on-by-one before you pour it by tipping it from top to bottom before the product is opened.

Step 4: Seal the Edges

Now, start sealing the edges by your hand. You can use a paintbrush to seal the edges.

Step 5: Pour down the Sealant along the Edges

Now, you are required to seal the remaining asphalt, so pour down the sealant alongside the width of the driveway. At an angle of 45-degree, use the squeegee to pull and compress the sealant into the driveway surface. Don’t push too hard or gently and use a paintbrush for the best finish.

 

Seal coating Mclean VA

Final Step: The Second Coat

Once you have finished the first coat and the sealed surface looks dry, now you should look for the areas that can become better with another coat. The second layer will make the layer even stronger, which will protect the surface well. So, do another coating and let it dry for another 24 hours.

So, this is how you can repair and seal your cracked asphalt without hiring a pro for asphalt crack repair and seal coating in McLean, VA. Never try the process, if you do not have any of the mentioned tools and materials. Hire professional help, if you have any confusion.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s